Roll over image to zoom in
Hitec HS-5085MG Digital Micro Programmable Metal Gear Servo
$39.95
$39.95
Description
Product Description
Hitec HS-5085MG Digital Micro Programmable Metal Gear Servo
Product Description
Nearly 60 oz.-in. of torque in a micro servo is amazing! Not only does the all new HS-5085MG give you power, it also offers excellent centering, resolution and, durability for those looking to save weight without sacrificing performance. An absolutely perfect choice for smaller airplanes, heli’s, boats, cars, trucks, and robots. The HS-5085MG offers a fine balance between speed and torque, incorporating the standard size Hitec spline means that all of your servo horns from standard size Hitec servos work with the HS-5085MG.
 |
A = .51” (12.9mm) B = .402” (10.2mm) C = .976” (24.8mm) E = .264” (6.7mm) F = .872” (22.15mm) G = .409” (10.4mm) H = .772” (19.6mm) J = 1.565” (39.75mm) K = .390” (9.9mm) L = .179” (4.55mm) M = 1.136” (28.85mm) X = .140” (3.56mm) |
| Dimensions | 1.14″ x 0.51″x 1.18″ (29 x 13 x 30mm) |
|---|---|
| Product Weight | 0.77oz (21.9g) |
| Output Shaft Style | 24 tooth (C1) spline |
| Voltage Range | 4.8V – 6.0V |
| No-Load Speed (4.8V) | 0.17sec/60° |
| No-Load Speed (6.0V) | 0.13sec/60° |
| Stall Torque (4.8V) | 50oz/in. (3.6kg.cm) |
| Stall Torque (6.0V) | 59.7oz/in. (4.3kg.cm) |
| Max PWM Signal Range (Standard) | 750-2250μsec |
| Travel per µs (out of box) | .083°/μsec |
| Travel per µs (reprogrammed normal res) | .120°/μsec |
| Max Travel (out of box) | 125° |
| Max Travel (reprogrammed normal res) | 180° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain – idle (4.8V) | 3mA |
| Current Drain – idle (6.0V) | 3mA |
| Current Drain – no-load (4.8V) | 200mA/idle |
| Current Drain – no-load (6V) | 240mA/idle |
| Current Drain – stall (4.8V) | 2A |
| Current Drain – stall (6V) | 3A |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 2µs |
| Motor Type | Carbon Brush |
| Potentiometer Drive | 6 Slider Indirect Drive |
| Internal Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Dual Ball Bearings |
| Gear Type | Straight Cut Spur |
| Gear Material | Metal |
| Wire Length | 7″ (178mm) |
| Wire Gauge | 28AWG |
QUESTIONS?
What would you like to know about this product?
